Skip to content
STUDENT LENS Showing first-principles foundations, visual maths intuition, and exam and interview preparation.

FDM vs. SLA vs. SLS: Strength, Anisotropy & Accuracy in 3D-Printed Parts

By Neil Harwani • 1 min read • Published 13 Nov 2026

Key takeaway

Additive manufacturing avoids mould tooling, so it often wins for low volumes, fast iteration or complex internal geometry; injection moulding wins once tooling is spread over large runs.

Student lens

Three common processes

ProcessHow it worksStrengthsWatch out for
FDMExtrudes molten filamentCheap, fast prototypesWeak between layers
SLACures liquid resin with lightFine detail, smooth finishBrittle resins, post-curing
SLSSinters powder with a laserStrong, no supports neededGrainy surface, costly machines

Anisotropy

Printed parts are usually weaker across layers than along them. Orient the part so the main load runs along the layers.

Topology optimisation

Software removes material that carries little load, producing organic lattice shapes that are light and stiff — often only manufacturable by printing.

Young-pro lens

The break-even model

For a production run of $n$ parts:

$$\text{Cost}_{\text{moulding}} = T + n\,c_m, \qquad \text{Cost}_{\text{print}} = n\,c_p$$

where $T$ is tooling cost and $c_m < c_p$ are unit costs. Break-even is at $n^* = T / (c_p - c_m)$. Below $n^*$, print; above it, mould.

What the simple model misses

  • Lead time: no tooling wait can be worth more than unit cost for launches and spares.
  • Design changes: each mould change costs money; a print file change costs almost nothing.
  • Inventory: printing spares on demand can replace warehoused stock.
  • Part consolidation: one printed part may replace an assembly.

Use your own supplier quotes for $T$, $c_m$ and $c_p$ — they vary a lot by material, size and region.

Related guides

Every Sunday

Subscribe to The Intersection Brief

One concise breakdown connecting developments in deep tech, engineering and bio with their economic and management impact.